integrated circuit r dc components co., ltd. technical specifications of 3-terminal positive voltage regulator description these regulators empoly internal current limiting and thermalshutdown, making them essentially indestructible. they can deliver over 1a output current with adequate heatsinking. they are intended as fixed voltage regulators in a wide range of applications including local, on-card regulation for elimination of noise and distribution problems associated with single-point regulation. pinning 1 = input2 = ground 3 = output de7805DE7805A characteristic symbol rating unit input voltage vi 35 v total power dissipation pd internal limit w operating temperature range topr 0 to +125 oc maximum junction temperature tj 125 oc storage temperature range tstg -55 to +150 oc lead temperature(soldering 10 sec.) tl 230 oc absolute maximum ratings (ta=25oc) characteristic symbol min typ max unit test conditions DE7805A 4.85 5.00 5.15 tj=25oc output voltage de7805 vo 4.80 5.00 5.20 v DE7805A 4.85 5.00 5.15 pd 15w, 5ma io 1a de7805 4.75 5.00 5.25 DE7805A - 4.0 50 tj=25oc, 7v vin 25v line regulation de7805 regline - 4.0 100 mv DE7805A - 1.6 25 tj=25oc, 8v vin 25v de7805 - 1.6 50 load regulation regload - - 100 mv tj=25oc, 5ma io 1.5a - - 50 tj=25oc, 250ma io 750ma input bias current iib - 5.5 8.0 ma tj=25oc, io 1a input bias current change diib - - 0.5 ma 5ma io 1a - - 1.3 7v vin 25v output noise voltage DE7805A vn - 40 200 mv ta=25oc, 10hz f 100khz de7805 - 100 300 ripple rejection DE7805A rr - 68 - db 8v vin 18v, f=120hz de7805 62 73 - dropout voltage DE7805A vd - 2.0 - v tj=25oc, io=1a de7805 - 2.5 - short circuit current isc - 1.5 - a tj=25oc peak output current imax 1.7 - - a tj=25oc average t c of vout dvo / dt - -0.8 - mv / oc 0oc tj +125oc, io=5ma electrical characteristics( vin =10v, iout=500ma, 0oc tj 125oc, unless otherwise specified) to-220ab dimensions in inches and (millimeters) .625(15.87).570(14.48) .350(8.90).330(8.38) .562(14.27).500(12.70) .055(1.39).045(1.15) .185(4.70).173(4.40) .405(10.28) .380(9.66) .295(7.49).220(5.58) .640 (16.25) typ .055(1.40).045(1.14) .037(0.95).030(0.75) .100 (2.54) typ .024(0.60).014(0.35) f.151 f(3.83) typ 1 2 3
|
